Archives

Together with members of the Quality Alliance, we will participate in the pavilion “Made in Germany” at Alumesse China. The fair will take place from 10 to 12th, July 2019 at the SNIEC – Shanghai New International Expo Center Booth 1F25. Find out about our new products and references in China. We are looking forward to your visit.

This year, the four exhibitions GIFA, METEC, THERMPROCESS and NEWCAST, in Dusseldorf, were, once again, able to gather a professional audience and exhibitors from all over the world.

During the exhibition MESACON® Messelektronik GmbH Dresden presented  it‘s products, and established contacts with possible customers and partners in numerous interesting discussions.

Metec 2019

Read the rest of this entry »

In times of increasing demands for quality controls from the automotive industry, more and more Steel-Service-Centers decides for radiometric thickness measuring systems from MESACON® Messelektronik. The readiness to invest in innovative technologies for product and process optimization, even in economic difficult times, testifies to the enormous competitive advantage for the Service-Centers, which pursue a consistent implementation of the zero-defect principle.

The MESACON® software, which has been specially developed for cutting and slitting lines, enables the operator to identify continuously the thickness deviations of each single strip during production. In combination with a separate strip width measuring system, MESACON provides the evidence for the quality assurance to produce within the tolerances.

compact mechanic concept with hanging C-frame

Read the rest of this entry »

“The Bright World of Metals” – is the title of this year’s international metallurgy trade fair METEC from 25th to 29th June 2019. As a specialist in non-contact thickness gauges MESACON® Messelektronik GmbH Dresden will participate again with the Quality Alliance.

METEC 2019

The METEC is the leading trade fair in our industry and focuses on metals and their complex, innovative manufacturing processes. A huge amount of exhibitors will be presenting the latest technology and cutting-edge innovations.Gladly we give you more detailed information for our high-precision and non-destructive measuring systems, based on isotope, x-ray or laser sensors. A particular focus will be applications in Steel Service Center. You will find us in hall 4 booth F29-1.

Read the rest of this entry »

Did you know that MESACON Messelektronik is the leading supplier of steel service center solutions? For more than 20 years, a large number of thickness gauges for slitting and cross-cutting systems have been used worldwide.

– 80% of the plants are used in leading steel service centers in Germany
– 30% of the facilities are now also used for aluminum
– 40% of the plants have an SAP connection
– 70% of the systems use an X-ray generator for measurement
– 95% of the plants are fully automated

Measurement F3500 in SSC

Read the rest of this entry »

The Laser optical thickness measurements based on laser triangulation is a widely used technology in the non-destructive monitoring of flat products.
The F5500 measuring system represents an interesting alternative to radiometric systems due to the rather simple and compact measurement setup, the independence on the chemical composition of the material to be measured, as well as the comparatively low acquisition costs and maintenance efforts. Furthermore, topics such as radiation protection and time consuming authorization issues became obsolete. However, what seems to be a simple and easy measurement solution at the first glance holds a number of challenging difficulties.

 

F5500 Laser gauge as an O-frame version

Read the rest of this entry »

MESACON Messelektronik GmbH Dresden was successful in achieving the extension in accordance with the new ISO 9001: 2015 certification until 2020.

Read the rest of this entry »

The ALUMINUM 2018 in Dusseldorf was once again an important get-together of the Who’s Who of the international aluminum industry. For us as MESACON® Messelektronik – successfully active as a specialist for non-contact thickness measuring systems for flat products for more than 60 years – the exhibition was once again a complete success. The international character of this event has also strengthened the development of business relations in international markets.

Beside the European, Russian and Indian markets, also the Chinese one is a highly attractive sales market for our quality assurance systems, as evidenced by our participation in this year’s ALUMINUM China 2018 in Shanghai.

Quality Alliance booth – MESACON

Read the rest of this entry »

The ALUMINUM is the world’s leading trade fair for the aluminum industry and its main user industries. The trade fair connects producers, processors, end users and technology suppliers. At the ALUMINUM, international innovations will be presented along the entire value chain.

Aluminium Trade Fair 2018

In this context, we presented ourselves in Düsseldorf from 09.-11. October 2018 together with the Quality Alliance.

Visit us at booth 9C35!


Mesacon recently partcipated in the Aluminium China show in Shanghai, together with other members of the Quality Alliance. The well attended show gave the chance to meet with existing customers who visited, as well as giving the possibility to meet with potential new customers.

Aluminium China 2018

Read the rest of this entry »

Sprachauswahl:
Warmwalzwerke
Dickenmessung im Warmwalzwerk
Kaltwalzwerke
Dickenmessung im Kaltwalzwerk
Beschichtungsanlagen
Beschichtungen messen
Mesacon Netzwerk

Quality Alliance

Mesacon hat sich mit Partnern in der Quality-Alliance zusammengeschlossen.